Audiovox ACC56, ACC-56 owner manual Procedure for Vertical Installation

PROCEDURE FOR VERTICAL INSTALLATION

NOTE:

If the anti-vibration spring position has been changed and verified for vertical mounting (as shown on page 6), start with step 2.

1	Set the 4 anti-vibration springs to position "V".	2	Attach bracket (L) and bracket (R) to each side of the unit,
			using the hexagonal bolts with washer base (M5 x 8).
			NOTE: Use seals (A) to cover unused
			mounting holes on sides of unit.

position "V"

Bracket (L)

Bracket (R)

Hexagonal bolt

with washer base (M5 x 8)

3	Determine the mounting location, and drill four mounting		4	Mount the unit in place, using four self-tapping screws
	holes.			(M5 x 12).
				Use RTV (silicone sealer) on screw threads or around
		Never mount the unit near the fuel tank.		the holes to prevent moisture intrusion.

Self-tapping screw (M5 x 12)

Bracket (L)

Drill holes 4 mm in diameter.

Bracket (R)

7