Lava Computer QUATTRO-PCI installation manual Windows 95/98/Me/2000 Installation

Windows 95/98/Me/2000 Installation

1.With the power turned off, insert the Quattro-PCI card into any free PCI slot in your PC. Make sure the card is well seated. Insert the bracket with Ports C and D into a free slot. If you must detach the cables from the card to do so, be sure to install the cables back onto the card with the red wire corresponding to the“1”on the board. Turn your PC on and start Windows.

2.Windows will automatically detect the Quattro-PCI as a new PCI Serial Controller and ask you to insert the Installation Diskette. The installation files are located in the root directory of this disk. Windows XP may display a message to the effect that the drivers are not digitally signed. This warning can be ignored.

3.After the necessary files have been copied,Windows will complete the full installation of the Quattro-PCI. During this process, two Quattro-PCI parents will be created in Device Manager under Multi-Function Adapters, and four child ports will be created under Control Panel System Device Manager Ports.