Lava Computer IP/232 manual Data bits, Parity, Stop bits, Flow control, Terminal ID

10

Data bits

This parameter can be set from 5 to 8. By default this parameter is set to 8 bits.

Parity

This parameter can be set even, odd, none, mark, or space. By default this parameter is set to none.

Stop bits

This parameter can be set 1, 1.5, or 2. By default this parameter is set to 1.

Flow control

This parameter can be set XON/XOFF, hardware, or none. By default this parameter is set to none.

Terminal ID

This parameter gives an identifying name, if needed, that a remote server will identify with the serial port.