Windows NT 4.0 Installation

1.With the power turned off, insert the DSerial-PCI/LP card into any free PCI slot in your PC. Boot NT logging on as“Administrator”.

2.Place the DSerial-PCI/LP installation diskette into your floppy drive and select Run from the Start Menu. When prompted type: A:\NT4.0\Setup.

3.After the necessary files have been copied, select My Computer and start Control Panel. A new icon will appear called“LavaPort”.This applet should now be used to configure ALL Com Ports in your PC – not just Lava serial ports.

Please note that Com 1 may not appear in this applet if you have your mouse attached to Com 1.