LevelOne FSW-1611TX manual

Page 7

The Switches are a perfect choice for site planning to upgrade to Fast Ethernet in the future. Ethernet workgroups can connect to the Switches now, and change adapters and hubs anytime later without needing to change the Switches or reconfigure the network.

The Switches combine dynamic memory allocation with store-and- forward switching to ensure that the buffer is effectively allocated for each port, while controlling the data flow between the transmit and receive nodes to guarantee against all possible packet loss.

The LevelOne FSW-1611TX 16Port 10/100Mbps 13” Fast Ethernet Switch are an unmanaged 10/100 Fast Ethernet Switch that offers solutions in accelerating small Ethernet workgroup bandwidth. Other key features are:

Independent bandwidth for each port

100/10Mbps TP ports with Auto-Negotiation support

Bridging capability for 100Mbps and 10Mbps segments

Store and Forward technology

Built-in Crossover port

IEEE 802.3x flow control support for Full-Duplex operation

Back-pressure support for Half-Duplex operation

Three QoS levels checked via IP Header and 802.1Q VLAN Tag and selectable on per port basis.

512K Byte Buffer Memory

16K MAC Address Table

Desktop size with rack mounting capability

7

Image 7
Contents Users Guide 16Port 10/100Mbps 13 Fast Ethernet SwitchFCC Warning Table of Contents Unpacking Information Product Introduction Switching TechnologyFast Ethernet Technology Features Page Cabling Front PanelRear Panel Status LEDsPage To Locate the Switch on a Desktop InstallationTo stack your Switch Page Helpful Suggestions Prior to InstallationHalf- and Full-Duplex However Auto-NegotiationSample Application MAC Address TableTroubleshooting Always Check That LED Indicators Product Specifications