LevelOne FSW-1611TX manual Status LEDs, Rear Panel

Page 9

cabling.

Status LEDs

This LevelOne 16Port 10/100Mbps 13” Fast Ethernet Switch comes with a complete range of LEDs. The table below lists each LED’s name, color and a brief description of its function.

One for power On/Off

One per port for Link/Activity

One per port for Full-Duplex/Collision

 

 

 

NAME

COLOR

FUNCTION

PWR

Green

Lit: Power "On"

LINK/ACT

Green

Lit: When the port has a valid physical connection (Link)

 

 

with another device.

 

 

Blinks: When the port is sending or receiving data

 

 

(Activity).

FD/COL

Amber

Lit: When the port is set to Full-Duplex mode.

 

 

Blinks: When a collision is detected,in Half-Duplex mode.

 

 

 

 

 

 

 

 

 

The Rear Panel

Power Socket

The Power Socket is designed to be used with the power cord included in the product package.

a)Attach the female end of the cord to the power connector on the back panel.

b)Attatch the male end of the cord to a grounded power outlet.

9

Image 9
Contents Users Guide 16Port 10/100Mbps 13 Fast Ethernet SwitchFCC Warning Table of Contents Unpacking Information Switching Technology Product IntroductionFast Ethernet Technology Features Page Cabling Front PanelRear Panel Status LEDsPage Installation To Locate the Switch on a DesktopTo stack your Switch Page Prior to Installation Helpful SuggestionsHalf- and Full-Duplex However Auto-NegotiationSample Application MAC Address TableTroubleshooting Always Check That LED Indicators Product Specifications