PPTP Gateway | If your LAN has a PPTP gateway, then enter that PPTP gateway |
| IP address here. If you do not have a PPTP gateway then enter |
| the ISP’s Gateway IP address above |
Idle Time | You can specify an idle time threshold (minutes) for the WAN |
| port. This means if no packets have been sent (no one using the |
| Internet) throughout this specified period, then the router will |
| automatically disconnect the connection with your ISP. Note: Idle |
| time “0” means no time out, e.g. no time restriction (always On) |
Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for the PPTP connection. You can start using the router now, if you wish to use some of the advance features supported by this router see chapter 2, 3, 4.
23