LevelOne FBR-1406TX manual Wan, Dynamic IP address, Static IP address

Page 32

2.2 WAN

Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and you would like to change your Internet connection type. The WAN Settings screen allows you to specify the type of each WAN port connect you want to establish with your ISP. The WAN settings offer the following selections for the router’s WAN ports, Dynamic IP, PPPoE, PPTP, Static IP Address. You have to select one of the two WAN ports first and configure one WAN port at a time.

Parameters	Description
2.2.1 Dynamic IP address	Your ISP will automatically give you an IP address
2.2.2 PPPoE	Your ISP requires PPPoE connection.
2.2.3 PPTP	Your ISP requires you to use a Point-to-Point Tunneling
	Protocol (PPTP) connection.
2.2.4 Static IP address	Your ISP has given you an IP address already

Once you have made a selection, click <More Configuration> at the bottom of the screen and proceed to the manual’s relevant sub-section

32

Image 32

Contents LevelOne VersionIntroduction Appendix a Appendix B Glossary Minimum Requirements FeaturesPackage Content Reset Get to know the Broadband Router Back PanelLocal Area Network LAN Wide Area Network WANOff Front PanelLight Status Description Setup Diagram Below shows a typical setup for a Local Area Network LANConfigure your PC to obtain an IP address automatically DNS Configuration Select Disable DNSGetting started 2a Windows 95/98/Me2b Windows XP 2c Windows 2d Windows NT IP Address Select Obtain an IP address from a Dhcp server Page Quick Setup Wizard Chapter General Setup ChapterMenu Description Status Information ChapterQuick Setup Wizard Chapter General Setup ChapterStatus Information Chapter LogoutQuick Setup Time ZoneParameter Description End Daylight Savings TimeBroadband Type Cable ModemFixed-IP xDSL PPPoEParameters Description Host Name MAC AddressSubnet Mask Parameters DescriptionGateway IP Password Your password Service NameParameter Description User Name Please retypeMaximum Idle Time Auto-reconnectUser ID Parameter Description IP AddressGateway Pptp Gateway Idle TimeGeneral Settings Menu Description System WANLAN NATSystem End Daylight Savings Time Password Settings Parameters Description Current PasswordNew Password Idle Time OutPage Remote Management Parameters Description Host AddressPage Static IP address WANDynamic IP address Dynamic IP PPPoE PPP over EthernetConnectivity check WAN PolicyParameters Description Speed Page Secondary DNS Address optional 6 DNSParameters Description Domain Name Server DNS Server Ddns Parameters Default Description LAN PortIP Subnet Mask Dhcp ServerIP Address Pool To End IP 192.168.2.199 . If youVirtual Server NATParameter Description Address Mapping Page Address Mapping Example Address Mapping Virtual Server Parameters Description Private IPPrivate Port TypeExample Virtual Server Special Applications Example Special Applications Example5 DMZ Parameters Description Access ControlFirewall Page Access Control Parameters Description Enable Filtering FunctionAdd PC Page Example Access Control URL Blocking Schedule Rule Edit Schedule Rule Intrusion Detection Page Intrusion Detection Feature Stateful Packet InspectionSmtp Server Address POP3 Server AddressConnection Policy DoS Detect CriteriaParameters Description Enable DMZ 5 DMZPublic IP Address Client PC IP AddressPage QoS QoS Edit Rule Page Status ParametersDescriptionDevice Status Security LogStatus and Information Parameters Description InformationParameters Description Internet Connection Primary DNS and Secondary DNS being usedParameters Description Device Status Parameters Description Security Log Parameters Description Dhcp Client Log Reset Parameters Description Configuration Tools Parameters Description Firmware Upgrade Reset Parameters Description ResetHow to Manually find your PC’s IP and MAC address Appendix aAppendix B Specifications Standards DimensionsPower WeightGlossary TCP FTP Smtp POP3