LevelOne FBR-1406TX manual Add PC

Add PC

Parameters	Description
Client PC Description	The description for this client PC rule.
Client PC IP Addresses	Enter the IP address range that you wish to apply this
	Access Control rule. This is the user’s IP address(es)
	that you wish to setup an Access Control rule. You can
	select a range of users simply by inputting the starting
	users’ last digit (octet) IP address and the last user’s last
	octet IP address in the appropriate boxes. If you want to
	select only one user then input the user’s last digit IP
	address in both boxes.
	Note: You need to give your LAN PC clients a
	fixed/static IP address for the Access Control rule to
	work properly.
Client PC Service	You can block the clients from accessing some
	Internet services by checking the services you want
	to block.
Protocol	This allows you to select UDP or TCP protocol type
	you want to block.
	51