IMC Networks AccessEtherLinx/4 operation manual Cleandb, Downloading Files

ifstats	Displays Ethernet statistics.
rmstats	Displays RMON statistics.
cleandb	Reboots the AccessEtherLinX/4 with a clean database. This removes all
	of the information in the database with an option to change the IP
	address of device.
download	Opens the Download dialog from which you download firmware from
	the server address entered in Server IP Addr in the Main Configuration
	screen using TFTP protocol.
version	Displays the AccessEtherLinX/4 serial number and build date.
vlan	Displays and changes VLAN settings (see Configuring VLANs)
reboot	Reboots the unit
security	Allows ARP request configuration
accounts	Allows addition/deletion of Username/Password accounts.
	Administrators must maintain a password list.
unit	Unit Global Settings
port	Displays port status values and allows some configuration (See Port
	Configuration section)
bw	Bandwidth Limiting Controls
dlsecure*	Downlink ports are isolated from one another (i.e. there is no
	communication between downlink ports).
	(Configuration is not cleared by the cleandb.)
dl_open*	Downlink ports can communicate with each other.
bpdu	Turns on/off the passing of BPDU packets (Bridge Protocol Data
	Units)
sysdescr	Allows the editing of sysName, sysDescr, and Port information
	text.

*Perform a reboot after using the dlsecure and dl_open commands.

Downloading Files

Firmware for the AccessEtherLinX/4 can be downloaded from a central server via TFTP protocol. Initiate this download via serial configuration or Telnet session. To download a file, type download and press Enter to be taken to the “Download a file” screen. This screen displays the IP Address of the TFTP server and the name of the file to be downloaded. The TFTP server should be open. Make sure the IP Address and the name of the file are correct in the Current Values section of the Main Configuration screen. These are changed by entering I from the Main Configuration screen. Press Enter to start downloading the file.

10