IMC Networks IE-IMCV-T1-MUX/4 LED Operation, 10/100BaseT Connector, T1 RJ-48 Connectors

LED Operation

The IE-iMcV-T1-Mux/4 + Ethernet features diagnostic LEDs as explained below.

10/100BaseT Connector

LNK:

•OFF when port is not linked/connected

•Glows green when link is established

•Blinks green during data activity

FDX:

•OFF when port is not connected or when running at half-duplex

•Glows yellow when port is running at full duplex

•Blinks yellow when collisions occur

T1 RJ-48 Connectors

ALARM:	STAT:
• OFF during normal operation	•	Off if not
• Blinks red+green simultaneously	•	equipped
when CV errors detected on the T1		Glows green
line		during normal
• Glows red+green when loss of	•	operation
service (LOS) is detected, OR		Glows
continuous bit errors are detected		red+green when
on the T1 line at far end of the		out-of-service or
optical line		when the port is
• Blinks red when local CV errors		in a loopback or
detected on T1 line.	•	test state
• Glows red when LOS detected on		Glows red when
the local T1 line, OR		the Host to
when continuous errors are		Remote fiber
detected on the local T1 line		link(s) is down or
		badly corrupted

7