Main Menu
From the main menu, the
Menu Options
1 = Refer to the Unit Configuration Screen
2 = Refer to the Port Alarm Status screen
3 = Refer to the SFP Line Status screen; SFP DDMI alarms are also displayed 4 = Refer to the Ethernet Port Configuration screen
5 = Refer to the Ethernet Port Status screen
6 = Refer to the T1 Port Configuration screen
7 = Refer to the T1 Port Status screen
8 = Logout
NOTE
On all configuration screens, the title is the same as the "option" selected from the previous screen.
Unit Configuration Screen
The unit configuration screen displays the names of the Host and Remote units as well as the service state, whether fiber protection is enabled and the SFP BER alarm level. In addition, the unit time can be set from this screen and the username and password can be set/reset.
15