IMC Networks 6, 3, 20 Replacing Power Supply Modules, User-Replaceable Power Supply Modules

Page 11

Replacing Power Supply Modules

User-Replaceable Power Supply Modules

While power supply modules are redundant, failed power supply modules should promptly be replaced to maintain network integrity and prevent data loss.

To replace a power supply module:

1.Disconnect the power source from the power supply module.

2.Remove the screws of the retainer plate (on some AC modules).

3.Move the Power Supply Release switch toward the right or unscrew captive release screw.

4.Before grasping the power supply module by the silver handle, slide out of the chassis (Power supply modules are hot-swappable).

5.Install new power supply module. If module is equipped with an ON/OFF switch install the module with the switch in the OFF position.

Dual AC, Part Number 850-10960-2AC

7

Image 11

Contents IMediaChassis series FCC Radio Frequency Interference Statement WarrantyTable of Contents Safety Certifications About the iMediaChassis/20 IMediaChassis/20 FeaturesReset Alarm Switch LNK/ACT FDX/COL Temp FAN a / FAN B Installing the iMediaChassis/20 Wiring Instruction Guidelines for iMediaChassis/20-2DC Installing Snmp Management and Application Modules User-Replaceable Power Supply Modules Replacing Power Supply ModulesDo not mix AC and DC power supply modules Input Specifications IMediaChassis/20 SpecificationsAbout the iMediaChassis/6 IMediaChassis/6 FeaturesLNK/ACT Installing the iMediaChassis Installing Management and Application Modules DC Power Wiring, Replacing Power Supply Modules and Fans IMediaChassis/6 Specifications About the iMediaChassis/3 IMediaChassis/3 FeaturesInstalling the iMediaChassis/3 Snmp Write Lock Glows yellow when temperature of unit IMediaChassis/3 Specifications Hardware Feature Matrix IMC Networks Technical Support Electrostatic Discharge PrecautionsIMediaChassis/20 2006/95/EC iMediaChassis/6 and 3 73-23-EEC Safety CertificationsDocument Number 50-80954-01 A0