IMC Networks iMediaChassis/3, 20, iMediaChassis/6 operation manual Snmp Write Lock

Page 22

SNMP Write Lock

The SNMP Write Lock switch is located on the back of the iMediaChassis/3. The SNMP Write Lock switch prevents a new management board from re-configuring the application module settings (e.g., the status of

features such as LinkLoss, FiberAlert, Force mode, etc.) made via SNMP on any previous Management Modules.

NOTE

Leave this switch in the NORMAL position during day-to-day operation; the LOCKED position should only be used when changing the SNMP management board.

The SNMP Management Module can be removed and replaced as necessary. Refer to the SNMP Management Module manual for complete instructions about how to configure and operate. If an SNMP Management Module is installed, refer to the LED panel below for indicators of Link, Temperature, Power Supply modules and other functions.

18

Image 22

Contents IMediaChassis series Warranty FCC Radio Frequency Interference StatementTable of Contents Safety Certifications IMediaChassis/20 Features About the iMediaChassis/20Reset Alarm Switch LNK/ACT FDX/COL Temp FAN a / FAN B Installing the iMediaChassis/20 Wiring Instruction Guidelines for iMediaChassis/20-2DC Installing Snmp Management and Application Modules Replacing Power Supply Modules User-Replaceable Power Supply ModulesDo not mix AC and DC power supply modules IMediaChassis/20 Specifications Input SpecificationsIMediaChassis/6 Features About the iMediaChassis/6LNK/ACT Installing the iMediaChassis Installing Management and Application Modules DC Power Wiring, Replacing Power Supply Modules and Fans IMediaChassis/6 Specifications IMediaChassis/3 Features About the iMediaChassis/3Installing the iMediaChassis/3 Snmp Write Lock Glows yellow when temperature of unit IMediaChassis/3 Specifications Hardware Feature Matrix Electrostatic Discharge Precautions IMC Networks Technical SupportSafety Certifications IMediaChassis/20 2006/95/EC iMediaChassis/6 and 3 73-23-EECDocument Number 50-80954-01 A0