Intellinet Network Solutions 501705 manual Physical Parts and Panel of the Smart Server

the apply button.

„Power Down by press the power button

„Prompt Power Down

Please press and hold the power button at least 4 seconds.

-Hard Disk Standby

If the hard disk is idle for a while, we would like the hard disk to enter standby mode to reduce the consumption of power. In the left menu, select NAS Management -> HD Initialization Wizard, in HD Power Management Setting, please select the time in the ‘Turn Off hard disk’ field (Figure 3.2a). If you select ‘none’, the hard disk will not enter the standby mode even if it is always idle. If you select ’5 mins’, the hard disk will enter standby mode once it is idle for more than five minutes.

Figure 3.2a

Physical Parts and Panel of the Smart Server

One WAN port: 10/100 Mbps

5

© INTELLINET NETWORK SOLUTIONS