initiate a reset, you must hold the button for at least 5 seconds.
The primary default settings are listed in the following table.
Configuration Item | Default Settings |
Administrator Username | <empty> |
Administrator Password | Admin |
Internal IP address | 172.16.1.1 |
Power Button
Description | Status | Meaning | ||
of LEDsLED |
|
|
| |
Power | On | Power On | ||
Off | Power Off | |||
| ||||
Solid/Off | System is not working | |||
Flashing | System is working | |||
| ||||
| On | Link up | ||
WAN/LAN | Off | Link down | ||
Link/Activity | Flash | The interface is | ||
|
|
| transmitting/receiving packets | |
WAN/LAN | On | The network link is 100 Mbps | ||
10/100 Mbps | Off | The network link is 10 Mbps | ||
| No LED on | Current transfer rate is < 10KB/s | ||
| 1 | LED on | Current transfer rate is > 10KB/s | |
Throughput | 2 | LEDs on | Current transfer rate is >50KB/s | |
| 3 | LEDs on | Current transfer rate is >100KB/s | |
| 4 | LEDs on | Current transfer rate is >500KB/s | |
Package Contents
7
© INTELLINET NETWORK SOLUTIONS