Intellinet Network Solutions 524957 user manual Static IP

Page 28

Primary DNS: Your ISP will provide at least one Domain Name System (DNS) IP address. (DNS translates readable/recognizable domain names into numerical IP addresses.) Enter the IP address of your DNS server here.

Secondary DNS: As an option, you can enter the IP address of a backup DNS server here.

MAC Address: The WAN port of the router has a unique Media Access Control (MAC) address assigned to it referred to as “Default MAC.” The “Clone MAC” option is available for special situations; for example, since an ISP allows only certain MAC addresses access to the Internet, selecting “MAC Address” and clicking “Clone MAC” modifies your WAN port’s MAC address in order to avoid detection of the router, which can lead to a service disconnect.

3.3.2 Static IP

This connection type allows you to maintain the same IP address over time (unlike “temporary” dynamic IP addresses that are assigned with each Internet connection).

IP Address: Enter the address provided by your ISP.

Subnet Mask: Specify a subnet mask for your WAN segment.

Gateway IP: This is provided by your ISP.

MTU: The MTU (Maximum Transmission Unit) setting specifies the largest packet size permitted for network transmission. Most DSL

28ROUTER SETUP

Image 28
Contents Model Package Contents IntroductionTable of Contents Hardware Installation Rear Panel Ports & JacksNetwork Settings IP Address SetupFront Panel LEDs Windows 98SE / MeWindows Network Settings Network Settings Windows XP Network Settings Network Settings Windows Vista/7 Network Settings Confirming the Connection Network Settings Logging In to the Web Browser Router Setup Router Setup Quick SetupRouter Setup Router Setup Retype Password For confirmation Service Name For reference Retype Password For confirmationRouter Setup Current / New / Re-type Password Enter as indicated AdminManagement System Settings Firmware UpgradeConfiguration Tools Log SettingsLanguage WAN Dynamic IP AddressStatic IP Router Setup Please retype your password For confirmation PPPoEBigPond Router Setup LAN Settings LANDhcp Client List NAT Virtual ServerPort Triggering Port MappingPassthrough 5 DMZ Add/Modify Click to add/edit rules you’ve configured Firewall Options FirewallClient Filtering Router Setup URL Filtering MAC FilteringRouting Routing TableStatic Routing Enable Dynamic RoutingDynamic Routing QoS Working Mode Select Router or Default GatewayPort Based High / Medium / Low Queue Weight Enter your preferred values DscpMiscellaneous UPnPDdns Status High LevelStatus 11.2 Log Troubleshooting If you forget your passwordSpecifications StandardsGeneral RouterLEDs PowerEnvironmental Waste Electrical & Electronic Equipment