Intellinet Network Solutions 524957 user manual BigPond

Page 31

a problem occurs, contact your ISP for information about correcting the MTU value.)

Primary DNS: Your ISP will provide at least one Domain Name System (DNS) IP address. (DNS translates readable/recognizable domain names into numerical IP addresses.) Enter the IP address of your DNS server here.

Secondary DNS: Enter the IP address of a backup DNS server here.

MAC Address: The WAN port of the router has a unique Media Access Control (MAC) address assigned to it referred to as “Default MAC.” The “Clone MAC” option is available for special situations; for example, since an ISP allows only certain MAC addresses access to the Internet, selecting “MAC Address” and clicking “Clone MAC” modifies your WAN port’s MAC address in order to avoid detection of the router, which can lead to a service disconnect.

Connection Mode: There are three options in the drop-down menu:

•Keep-Alivekeeps you connected to the Internet indefinitely, even when your connection sits idle.

•Auto-Connectis suitable for Internet connections that need to record the online time. It doesn’t connect to the Internet when the power is on, only when an access request is made (it will connect automatically.) When there is no access request within a set timeframe (60-3600 seconds), it will disconnect

•Manual On is suitable when the access method is controlled by an administrator using a password. It doesn’t connect to the Internet when the power is on, only when you connect or disconnect manually.

3.3.4 BigPond

This connection option is used in conjunction with Telstra, Australia’s largest ISP.

BigPond Account: Enter the user name provided by the ISP.

BigPond Password: Enter the password provided by the ISP.

Please Retype Your Password: For confirmation.

MTU: The MTU (Maximum Transmission Unit) setting specifies the largest packet size permitted for network transmission. Most DSL users should use the value 1492.You can set MTU manually, and you should leave this value in the 576 to 1500 range. NOTE: If the

ROUTER SETUP

31

 

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Model Introduction Package ContentsTable of Contents Rear Panel Ports & Jacks Hardware InstallationWindows 98SE / Me Network SettingsIP Address Setup Front Panel LEDsWindows Network Settings Network Settings Windows XP Network Settings Network Settings Windows Vista/7 Network Settings Confirming the Connection Network Settings Logging In to the Web Browser Router Setup Quick Setup Router SetupRouter Setup Router Setup Retype Password For confirmation Retype Password For confirmation Service Name For referenceRouter Setup Current / New / Re-type Password Enter as indicated AdminManagement Firmware Upgrade System SettingsConfiguration Tools Log SettingsLanguage Dynamic IP Address WANStatic IP Router Setup PPPoE Please retype your password For confirmationBigPond Router Setup LAN LAN SettingsDhcp Client List Virtual Server NATPort Mapping Port TriggeringPassthrough 5 DMZ Add/Modify Click to add/edit rules you’ve configured Firewall Options FirewallClient Filtering Router Setup MAC Filtering URL FilteringRouting Table RoutingStatic Routing Enable Dynamic RoutingDynamic Routing QoS Working Mode Select Router or Default GatewayPort Based Dscp High / Medium / Low Queue Weight Enter your preferred valuesUPnP MiscellaneousDdns Status High LevelStatus 11.2 Log If you forget your password TroubleshootingRouter SpecificationsStandards GeneralLEDs PowerEnvironmental Waste Electrical & Electronic Equipment
Top Page Image Contents