FEATURE SETUP
CALLER ID
CALLER ID
All Calls
CALL HISTORY
FEATURE SETUP
CALLER ID
CALLER ID
Combined
REPEAT CALLS
Telephone operation
Feature setup
Set call history
You can choose whether or not to store calls in call history.
. Press ENTER to begin feature setup.
2.Press 
until the screen displays CALLER ID.
3.Press ENTER. The screen displays AREA CODES.
4.Press 
until the screen displays CALL HISTORY and the current setting.
5.Press 
or 
to select between All Calls and No Calls.
6.When the correct setting is shown, press 
or ENTER to save your choice. There is a high pitch tone to indicate confirmation and the screen displays REPEAT CALLS.
7.Proceed to step 5 below to set the next feature (Repeat calls).
— OR —
Press and hold ENTER to return to the idle screen.
Choose how to store repeat calls in call history
You can choose how new calls from the same number are displayed. Choose Combined to show only the most recent call from the number. Select Separate to display each call individually.
. Press ENTER to begin feature setup.
2.Press 
until the screen displays CALLER ID.
3.Press ENTER. The screen displays AREA CODES.
4.Press 
until the screen displays REPEAT CALLS and the current setting.
5.Press 
or 
to select between Combined and Separate.
6.When the correct setting is shown, press 
or press ENTER to save your choice. The screen displays CID-
CALL WAIT.
7.Proceed to Step 5 of Turn caller ID with call waiting on or off on page 29 to set the next feature (Caller ID
with call waiting).
— OR —
Press and hold ENTER to return to the idle screen.
28
