FUNAI BZV420MW8 owner manual Timer Recording, 26 EN, Use K / L to select a recording, mode

TIMER RECORDING

4Use [K / L] or [the Number buttons] to enter the start and end time, then press [B].

Timer Programming

MON JAN/01 11:00AM

Date	Start		End		E1/E2
Date	NewStartProgram				End
JAN/02	12	: 00AM			- - : - -
E1/E2	REC To			Mode
E1	DVD				SP
				SP	2 : 00

1/1

5Use [K / L] to select the appropriate external input position (E1/E2) to which your external tuner is connected, then press [B].

Timer Programming

MON JAN/01 11:00AM

Date	Start	End		E1/E2
Date	NewStartProgram			End
JAN/02	12 : 00AM		1 : 00AM
E1/E2	REC To		Mode
E1	DVD			SP
			SP	1 : 00

1/1

6Use [K / L] to select a recording media (“DVD” or “VCR”), then press [B].

		Date	Start	End		E1/E2
		Date	NewStartProgram			End
		JAN/02	12 : 00AM		1 : 00AM
		E1/E2	REC To		Mode
		E1	DVD			SP
					SP	1 : 00
						1/1
7	Use [K / L] to select a recording
	mode.
		Date	Start	End		E1/E2
		Date	NewStartProgram		End
		JAN/02	12 : 00AM		1 : 00AM
		E1/E2	REC To		Mode
		E1	DVD			SP
					SP	1 : 00
						1/1

Refer to “Recording Mode” on page 21 for DVD or “Recording” on page 77 for VCR.

•You can check the remaining recordable space of the disc when you select the recording mode.

Date	Start		End
JAN/02	12 : 00AM	1 : 00AM
E1/E2	REC To	Mode
E1	DVD		SP
		SP	1 : 00

Auto recording mode select...

When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program.

Date	Start	End
JAN/02	12 : 00AM	1 : 00AM
E1/E2	REC To	Mode
E1	DVD	Auto

Auto 0 : 00

•“Auto” is only available for one program in the timer program list.

•The recording may be cut short when the available recording space of the disc is too limited.

8Press [OK] when all items are entered.

• To set another program, repeat steps 2 to 7.Your program setting is now stored.

•To exit, press [TIMER] or [SETUP].

•When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue.

•To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 27.

9 Press [TIMER SET] to set a timer programming.

TIMER REC indicator will light up on the front panel.

Note

•If you have not set the clock yet:

“Clock Setting” menu will appear instead of the timer programming list at step 1. Continue with the step 4 in “Clock Setting” on page 20 before setting a timer programming.

•Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu.

•If a basic recording or one-touch timer recording is in progress on one component (e.g., VCR) and the timer recording set for the other component (e.g., DVD) is about to begin, the unit automatically switches to the programmed channel for timer recording 2 minutes before the programmed starting time, and the recording in progress (for VCR) will be canceled UNLESS their recording channels are the same. If their recording channels are the same, the timer recording will start without canceling the recording currently in progress. In this case, the recording of the same channel will be made on both DVD and VCR.

•Cancel the timer-standby mode by pressing

[TIMER SET] before operation for either DVD or VCR. When finished operating, press [TIMER SET] to resume the timer-standby mode.

•In the timer-standby mode, you can turn on the power and use the component (VCR or DVD) which is not currently timer-programmed.

26 EN