![](/images/new-backgrounds/1225332/22533253x1.webp)
VCR Operation (Continued)
Instant Timer Recording
Instant Timer Recording allows you to make a recording easily of a preset length without using the programma- ble timer.
Preparation:
Turn on the power of both the DVD/VCR Receiver and the TV. Be sure the TV is tuned to the DVD/VCR Receiver output channel (CH3 or 4).
If a direct VIDEO/AUDIO connection is made between the DVD/VCR Receiver and the TV, set the TV’s source selector to
VIDEO.
1Insert a video cassette with the safety tab intact.
Select the desired channel with CH/TRK v/V or
2 number
The channel number appears on the TV screen.
If you are recording from another source via audio/video input jacks (at the Rear or Front panel), select LINE1(L1) or LINE2(L2).
3 Select the desired recording speed (SP or SLP) with the SP/SLP button.
The tape speed will appear on the TV screen.
4The menu as illustrated, will appear on the TV screen. Recording will start. (The TIMER indicator will light)Press REC/ITR (z) twice.
5recording time length.
At the end of the recording, the DVD/VCR Receiver will stop recording and shut off.
During Instant Timer Recording, changing the channel
on the DVD/VCR Receiver will not be possible. You can stop the recording by pressing STOP.Press REC/ITR (z) repeatedly to select the
INSTANT TIMER RECORD MENU
INSTANT TIMER RECORD | 0H30M ..... 9H00M ➝ 0H00M | |||||
CHANNEL | 2 |
|
|
|
| |
|
| Length Display | ||||
SPEED | SP |
|
| |||
(each additional press of | ||||||
|
| |||||
START | NOW | REC/ITR (z) increases recording | ||||
LENGTH | 0H30M |
|
| time 30 minutes) |
Checking the Recording Time
Press REC/ITR (z) once to check the recording time. The recalled setting will automatically return to the TV screen after 6 seconds.
To extend the Recording Time
The recording time can be extended anytime by press- ing REC/ITR (z).
Subsequent presses result in advancing the recording time by
otes
If you press PAUSE/STEP during instant timer recording, the DVD/VCR Receiver will enter the recording pause mode. Instant timer recording is cancelled.
If the DVD/VCR Receiver is set to “0H00M”, the DVD/VCR Receiver goes to normal recording mode.
Dubbing and Editing
If you wish to edit or dub your camcorder (or another VCR) recordings to this DVD/VCR Receiver, the rear (or Front) panel mounted Audio and Video (A/V) input jacks make the connections quick and easy. These direct A/V jacks will also provide better picture results than using the RF jack on the rear panel.
1outputs to your DVD/VCR Receiver as illustrated on page 14.Connect the camcorder’s (or another VCR’s) A/V
Select the input channel “LINE2” (Use INPUT to
2 select LINE2(L2)).
If you have connected your DVD/VCR Receiver to the A/V input jacks on the rear of DVD/VCR Receiver, you should select the input channel LINE1(L1) by pressing INPUT twice.
Play the tape in the camcorder (or another
3 VCR). If you have a TV attached to your DVD/VCR Receiver, you can see the video play- ing.
When you desire the recording to begin, press
4 DVD/VCR Receiver’s REC/ITR (z) once to start.
You can stop the recording by pressing STOP.
ote
Before recording, please confirm the recording start position.
Copying from DVD to VCR
This unit allows you to copy the contents of a DVD to a VHS tape.
1Insert the disc you wish to copy in the DVD deck and close the disc tray.Insert Disc
Insert VHS Tape
2 Insert a blank VHS video tape into the VCR deck.
Press COPY button on the unit front panel or
3 press REC/ITR (z) button on the remote control.
The DVD will go into Play mode and the VCR will go into Record mode.
If the DVD disc menu appears, you may need to press PLAY manually to begin copying.
“COPY” indicator will light.
Stopping the Copy Process
4 When the DVD is finished playing, press STOP to end copying.
You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.
ote
If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. “LOCK” is displayed in the dis- play window.
When you stop the DVD playback during copying, VCR recording mode also stops automatically.
You must set Progressive Scan to Off to copy process.
OPERATION
27