Toshiba SD-V65HTSU owner manual Connections Basic TV Connections, Optional TV Connections

Connections (Continued)

Basic TV Connections

Make one of the following connections, depending on the capabilities of your TV.

RF coaxial connection

Connect the RF.OUT jack on the DVD/VCR Receiver to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R).

ote

If you use this connection, tune the TV to the DVD/VCR Receiver’s RF output channel (CH 3 or 4).

How to set the DVD/VCR Receiver’s RF output chan- nel

When the DVD/VCR Receiver is turned off, press and hold CH/PRESET (v/V) on the front panel for about five seconds to change the RF output channel (CH 03 or CH 04). “RF-03” or “RF-04” appears in the display win- dow.

Audio/Video connection

1DVD/VCR Receiver to the video in jack on the TV using the supplied video cable (V).Connect the DVD/VCR VIDEO OUT jack on the

2jacks on the DVD/VCR Receiver to the audio

left/right in jacks on the TV (A) using the supplied audio cables.Connect the Left and Right DVD/VCR AUDIO OUT

ote

If you use this connection, set the TV’s source selector to VIDEO.

Rear of TV

AUDIO INPUT		VIDEO	COMPONENT/PROGRESSIVE			ANTENNA	S-VIDEO
		INPUT		SCAN VIDEO INPUT		INPUT	INPUT
L	R	L	Pr	Pb	Y

A V C R S

Rear of DVD/VCR Receiver

Optional TV Connections

ote

DVD playback can also be done using the S-VIDEO OUT and COMPONENT/PROGRESSIVE SCAN VIDEO OUT connection options below. The tuner and VCR ONLY output through the RF.OUT (R) or DVD/VCR OUT (A,

V)jack. (See left)

S-Video Connection

1Receiver to the S-Video in jack on the TV using the S-Video cable (S).Connect the S-VIDEO OUT jack on the DVD/VCR

2the DVD/VCR Receiver to the audio left/right in

jacks on the TV using the supplied audio cables

(A).Connect the Left and Right AUDIO OUT jacks on

Component Video (Color Stream®) connection

1VIDEO OUT jacks on the DVD/VCR Receiver to the

corresponding in jacks on the TV using Y Pb Pr cables (C).Connect the COMPONENT/PROGRESSIVE SCAN

2 Connect the Left and Right AUDIO OUT jacks of the DVD/VCR Receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables.

Progressive Scan (ColorStream® pro) connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD/VCR Receiver’s progressive scan output for the highest video resolution possible.

If your TV does not accept the Progressive Scan for- mat, the picture will appear scrambled if you try Progressive Scan on the DVD/VCR Receiver.

1VIDEO OUT jacks on the DVD/VCR Receiver to the

corresponding in jacks on the TV using Y Pb Pr cable (C).Connect the COMPONENT/PROGRESSIVE SCAN

Connect the Left and Right AUDIO OUT jacks of

2 the DVD/VCR Receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables.

otes

Set the Progressive Scan to “On” on the DVD setup menu for progressive signal, see page 21.

Progressive scan does not work with the analog video connections (yellow VIDEO OUT and S-VIDEO OUT jack).

12