Controlling Your TV with the Supplied Remote
The remote control can be compatible with various brands of TV by setting their control codes. The TOSHI- BA code has initially been set to control TOSHIBA TVs.
Setting TV Control Codes
1. Press TV to set the remote control operating your TV.
2. While holding down PROGRAM button, enter the two digits of your TV’s brand code (listed on page 41) using number buttons.
3. Release PROGRAM.
By pressing | You can |
TV POWER | Turn the TV on or off. |
|
|
CH/TRK 4/3 | To select TV channels in the upper |
| or lower direction. |
|
|
VOLUME 4/3 | Adjust the volume of the TV. |
|
|
Number buttons | To select TV channels. |
| When selecting channels 1 to 9, |
| first enter 0 and then the desired |
| number. |
|
|
INPUT | Switch the TV’s input source |
| between the TV and other input |
| sources. |
|
|
Important
Some TV’s may not respond to all the operations above, or may not be operated at all with this remote control. In this case, operate your TV with its own remote control.
ote
For some brands, several control codes (brand codes) are allocated. Try each of them until the but- tons work on your TV.
If you replace the remote control’s batteries, set the brand code again.
TV POWER
INPUT
Number buttons
VOLUME
CH/TRK
40
