![](/images/new-backgrounds/1225332/22533245x1.webp)
DVD Operation Setup (Continued)
Parental Control
Rating DVD
Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. Ratings are country dependent. The Parental Control feature allows you to prevent discs from being played by your children or to have certain discs played with alternative scenes.
Disc Audio | 8 |
Disc Subtitle | 7 |
Disc Menu | 6 |
Rating | 5 |
Area Code | 4 |
TV Aspect | 3 |
Menu Language | 2 |
Progressive Scan | 1 |
| Unlock |
5.1 Speaker Setup | Change |
Others |
|
Select Rating on the Setup menu using v/V
1 buttons.
2While Rating is selected, press B.
3Enter a
password again and press ENTER to verify.
When you have already entered a password; Enter a
If you make a mistake before pressing ENTER, press CLEAR and enter
4One (1) has the most playback restrictions. Eight (8) has the least playback restrictions. The limitation will be more severe as the level number decreases.
Unlock: If you select Unlock, Parental Control is not active. The disc will play in full.
Ratings 1 to 8: Some discs contain scenes not suitable for children. If you set a rating for the DVD, all disc scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, play-
back will stop. You must enter the
Press ENTER to confirm your rating selection,
5 then press SETUP to exit the menu.
Area Code DVD
Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Country/Area Code List”, page 45).
| Disc Audio | Code Set |
| Disc Subtitle | U S |
| Disc Menu |
|
| Rating |
|
| Area Code |
|
| TV Aspect |
|
| Menu Language |
|
| Progressive Scan |
|
| 5.1 Speaker Setup |
|
| Others |
|
1 | Select Area Code using the v/V buttons on the | |
setup menu. |
|
2While Area Code is selected, press B.
3Follow step 3 of “Rating” on left.
4Select the first character using the v/V buttons.
5 Press 2 to shift to second character and select the second character using v/V buttons.
6selection, then press SETUP to exit the menu.Press ENTER to confirm your Area code
ote
Confirmation of the
Changing the 4-digit password
1Follow Steps
2 Enter the old password, then press ENTER.
3 Select Change using v/V buttons then press
ENTER.
4 Enter the new
ENTER.
5 Enter exactly the same password a second time and verify by pressing ENTER.
6 Press SETUP to exit the menu.
If you forget your 4-digit password
If you forget your password, to clear the current pass- word follow the procedure below.
1Press SETUP to display the setup menu.
2 Enter the
The
3 Enter a new password as shown above to the left (Rating).
PREPARATION
23