18: Hold Delay
18: Hold Delay
This effect records the input signal and plays it back repeatedly. You can control the start of recording and reset via a modulation source. Easy to use for
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out | ||
Left |
| Wet / Dry |
|
| |
| + | Delay |
|
| Pan |
|
| Loop Time: Auto/ ...2700ms |
Right |
| Wet / Dry |
|
| |
D | REC Control | |
| ||
|
| |
RST Control | ||
D |
| |
|
|
a | Loop Time [msec] | Auto, 1… 2700msec | Sets Automatic loop time setup mode or specifies loop | ||
time. ☞ P.140 | |||||
|
|
|
| ||
|
|
|
|
| |
b | REC Control Src | None… | Tempo | Selects control source for recording. ☞ P.140 | |
|
|
|
|
| |
c | RST Control Src | None… | Tempo | Selects control source for reset. ☞ P.141 | |
|
|
|
| ||
d | Manual REC Control | REC Off, REC On | Recording switch ☞ P.140 | ||
|
|
|
| ||
e | Manual RST Control | Off, RESET | Reset switch ☞ P.141 | ||
|
|
|
|
| |
| Pan | L100… | L1, C, R1… R100 | Sets the stereo image of the effect. | |
|
|
|
|
| |
f | Src | None… | Tempo | Modulation source of stereo image of the effect | |
|
|
|
|
| |
| Amt | +100 | Modulation amount of stereo image of the effect | ||
|
|
|
| ||
| Wet/Dry | Dry, 1:99… 99:1, Wet | Sets the balance between the effect and dry sounds. | ||
|
|
|
|
| |
g | Src | None… | Tempo | Modulation source of effect balance | |
|
|
|
|
| |
| Amt | +100 | Modulation amount of effect balance | ||
|
|
|
|
|
a:Loop Time [msec] With Auto, the loop time is automatically set. Otherwise, you can specify the loop time.
When Auto is selected, the Loop Time is automatically set to the time it takes for a performance recorded while the Modulation Source or Manual Rec Control is on. However, if the time length exceeds 2,700msec, the loop time will be auto- matically set to 2,700msec.
b:REC Control Src REC Control Src selects the modulation source that controls recording. If this
d:Manual REC Control modulation is on, or if Manual REC Control is set to REC On, you can record the
input signal. If a recording has already been carried out, additional signals will be overdubbed.
The effect is off when a value for the modulation source specified for the REC Control Src parameter is 63 or smaller, and the effect is on when the value is 64 or higher.