Korg Trinity ProX, Trinity Plus manual 43 St. Dynamic Delay Stereo Dynamic Delay, Control Target

43:St. Dynamic Delay (Stereo Dynamic Delay)

43:St. Dynamic Delay (Stereo Dynamic Delay)

This stereo delay controls the level of delay according to the input signal level. You can use this as a duck- ing delay that applies delay to the sound only when you play keys at a high velocity or only when the volume level is low.

Stereo In - Stereo Out
Left					Wet / Dry
		High Damp Low Damp
		Delay
Input Level
D-mod
		Feedback		Spread
Input Level		High Damp	Low Damp
D-mod
		Delay
Right					Wet / Dry
	In	FB		Out
+	Envelope	Attack, Release		Control Target
		Threshold

	Control Target	None, In, Out, FB				Selects from no control, input, output, and feedback.
a						☞ P.110
	Polarity	+, –				Reverses level control ☞ P.110
b	Threshold	0…	100			Sets the level to which the effect is applied.☞ P.110
c	Attack	1…	100			Attack time of level control☞ P.110
d	Release	1…	100			Release time of level control ☞ P.110
e	L Delay Time [msec]	0.0…		680.0msec		Sets the delay time for the left channel.
f	R Delay Time [msec]	0.0…		680.0msec		Sets the delay time for the right channel.
g	Feedback	–100…			+100	Sets the feedback amount.
h	High Damp [%]	0…	100%			Damping amount in the high range ☞ P.44
	Low Damp [%]	0…	100%			Damping amount in the low range
i	Spread	–100…			+100	Sets the width of the stereo image of the effect sound.
						☞ P.65
	Wet/Dry	Dry, 1:99… 99:1, Wet				Sets the balance between the effect and dry sounds.
j	Src	None…			Tempo	Modulation source of effect balance
	Amt	–100…			+100	Modulation amount of effect balance

a: Control Target	In this field, you can select from no level control, control of delay input level,
	output (effect balance), and feedback amount.
a: Polarity	When Polarity is positive, delay is applied when the input signal level exceeds
b: Threshold	the Threshold value. When Polarity is negative, delay is applied when the input
c: Attack	signal level is lower than the Threshold value.
d: Release	The Attack and Release parameters specify attack time and release time of delay
	level control.

110