17: Envelope Flanger
17: Envelope Flanger
This Flanger uses an envelope generator for modulation. You will obtain the same pattern of flanging each time you play. You can also control the Flanger directly using the modulation source.
Mono In - Mono Out |
|
|
|
In |
|
| Wet / Dry |
|
|
| |
|
| Flanger |
|
|
| Feedback | High Damp |
|
| ||
| EG Decay | Sweep Mode |
|
| EG |
| |
|
|
|
a | Delay Bottom [msec] |
| 0.0… | 50.0msec | Sets the lower limit of Delay Time. ☞ P.24 | |
|
|
|
|
|
| |
b | Delay Top [msec] |
| 0.0… | 50.0msec | Sets the higher limit of Delay Time. ☞ P.24 | |
|
|
|
|
|
|
|
| Sweep Mode |
| EG, | Determines whether the flanger is controled by the enve- | ||
|
| lope generator or by the modulation source. ☞ P.34 | ||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
c |
|
|
|
|
| Modulation source that triggers the EG (when EG is |
|
|
|
|
| selected for Sweep Mode), or modulation source that | |
| Src |
| None… | Tempo | ||
|
| causes the flanger to sweep (when | ||||
|
|
|
|
|
| |
|
|
|
|
|
| Sweep Mode). |
|
|
|
|
| ||
d | EG Decay |
| 1… 100 | Sets the EG decay speed. ☞ P.34 | ||
|
|
|
|
|
| |
e | Feedback |
| +100 | Feedback amount ☞ P.32 | ||
|
|
|
|
| ||
f | High Damp [%] |
| 0… 100% | Feedback damping amount in the high range ☞ P.32 | ||
|
|
|
|
| ||
| Wet/Dry |
| Sets the balance between the effect and dry sounds. | |||
|
| 1:99… |
| Wet | ☞ P.25, 32 | |
|
|
|
| |||
g |
|
|
|
|
|
|
Src |
| None… | Tempo | Modulation source of effect balance | ||
|
| |||||
|
|
|
|
|
| |
| Amt |
| +100 | Modulation amount of effect balance | ||
|
|
|
|
| ||
c: Sweep Mode | This parameter switches the flanger control mode. With Sweep Mode = EG, the | |||||
c: Src |
| flanger will sweep using the envelope generator. This envelope generator is | ||||
|
| included in the envelope flanger, and not related to the Oscillator EG, Filter EG, | ||||
|
| or Amp EG. |
|
|
| |
The Src parameter selects the source that starts the envelope generator. If you select, for example, Gate, the envelope generator will start when the
When Sweep Mode =
d: EG Decay | Decay speed is the only adjustable parameter on this EG. |
The effect is off when a value for the modulation source specified for the Src parameter is smaller than 64, and the effect is on when the value is 64 or higher. The Envelope Generator is triggered when the value changes from 63 or smaller to 64 or higher.
34
