02: Stereo Limiter
02: Stereo Limiter
This effect is a stereo limiter. You can link left and right channels, or use each channel individually.
Stereo In - Stereo Out |
|
|
Left |
| Wet / Dry |
|
| |
|
| Gain Adjust |
|
| Limiter |
| Side PEQ |
|
+ | Envelope - Control | Trigger Monitor |
| ||
Envelope - Control |
| |
|
| |
| Envelope Select | Limiter |
|
| |
|
| Gain Adjust |
Right |
| Wet / Dry |
|
|
|
| L/R Mix, L Only, R Only, L/R | Selects from linking both channels, controlling only from | ||||
a | Envelope Select | left channel, only from the right channel, or controlling | |||||
Individually | |||||||
|
| each channel individually. ☞ P.49 | |||||
|
|
|
|
|
| ||
|
|
|
|
| |||
b | Ratio | 1.0:1… | 50.0:1, Inf:1 | Sets the signal compression ratio. ☞ P.15 | |||
|
|
|
|
|
|
| |
c | Threshold [dB] | 0dB | Sets the level above which the compressor is applied. | ||||
☞ P.15 | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
d | Attack | 1… | 100 |
| Sets the attack time. ☞ P.16 | ||
|
|
|
|
|
| ||
e | Release | 1… | 100 |
| Sets the release time.☞ P.16 | ||
|
|
|
|
| |||
f | Gain Adjust [dB] | +24dB | Sets the output gain.☞ P.15 | ||||
|
|
|
|
| |||
g | Side PEQ Insert | Off, On |
| Toggles between trigger signal’s EQ on/off☞ P.16 | |||
|
|
|
|
|
| ||
| Side PEQ Cutoff [Hz] | 20… |
| 12.00kHz | Trigger signal’s EQ center frequency ☞ P.16 | ||
|
|
|
|
| |||
h | Q | 0.5… | 10.0 | Trigger signal’s EQ bandwidth | |||
|
|
|
|
| |||
| Gain [dB] | +18.0dB | Trigger signal’s EQ gain | ||||
|
|
|
|
|
|
| |
i | Trigger Monitor | Off, On |
| Switches between effect output monitor and trigger signal | |||
| monitor.☞ P.16 | ||||||
|
|
|
|
|
| ||
|
|
|
| ||||
| Wet/Dry | Dry, 1:99… 99:1, Wet | Sets the balance between the effect and dry sounds. | ||||
|
|
|
|
| |||
j | Src | None… | Tempo | Modulation source of effect balance | |||
|
|
|
|
| |||
| Amt | +100 | Modulation amount of effect balance | ||||
|
|
|
|
|
|
|
a:Envelope Select When L/R Mix is selected for this parameter, the left and right channels are linked to control the Limiter using the mixed signal. If L Only (or R Only) is selected, the left and right channels are linked, and the Limiter is controlled via only the left (or right) channel.
With L/R individually, the left and right channels control the Limiter individu- ally.
size2 |
49