
12:Rotary Speaker OD (Rotary Speaker Overdrive)
| Horn Acceleration |
| 0… | 100 |
|
| How quickly the horn rotation speed in the high range is |
|
|
|
| switched. ☞ P.43 | |||
h |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Horn Ratio |
| Stop, 0.50… | 2.00 | Adjusts the | |||
|
| ||||||
|
| dard value is 1.0. Selecting “Stop” will stop the rotation. | |||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| Mic Distance |
| 0… | 50 |
|
| Distance between the microphone and rotary speaker. |
i |
|
|
| ☞ P.101 | |||
|
|
|
|
|
| ||
|
|
|
|
|
|
| |
| Mic Spread |
| 0… | 50 |
|
| Angle of left and right microphones |
|
|
|
|
|
| ||
| Wet/Dry |
| Dry, 1:99… | 99:1, Wet | Sets the balance between the effect and dry sounds. | ||
|
|
|
|
|
| ||
j | Src |
| None… | Tempo | Modulation source of effect balance | ||
|
|
|
|
|
| ||
| Amt |
| +100 | Modulation amount of effect balance | |||
|
|
|
|
| |||
a: Sw |
| This parameter determines how to switch on/off the overdrive via a modula- | |||||
|
| tion source. |
|
|
|
When Sw = Momentary, overdrive is applied only when a pedal or joystick is held in position.
Only when the value for the modulation source is 64 or higher, the over- drive effect is applied.
When Sw = Toggle, overdrive is turned on/off each time the pedal or joystick is operated.
Each time when the value for the modulation source exceeds 64, the over- drive effect is switched on/off.