Korg Trinity Pro manual 11 2Band Pitch Shifter, Wet Mono In Stereo Out / Dry Stereo In Stereo Out

11: 2Band Pitch Shifter

11: 2Band Pitch Shifter

This pitch shifter sets an individual shift amount for the high and low input signal ranges. If you apply a detune effect to the high range of a string sound, and add the lower octave to the low range, a large ensemble sound is produced.

Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left			Wet / Dry
	High Damp
	Pitch Shifter
+	High/Low Split Point	High/Low	Spread
		Balance
	Pitch Shifter
	High Damp
Right			Wet / Dry

a	Mode		Slow, Medium, Fast			Switches pitch shifter mode. ☞ P.96
	Low Pitch [1/2tone]		–24…		+24	Sets pitch shift amount for the low range in steps of a
						semitone. ☞ P.97
b
	Src		None… Tempo			Modulation source of pitch shift amount
	Amt		–24…		+24	Modulation amount of pitch shift amount for the low range
	Low Fine [cent]		–100…		+100cent	Sets pitch shift amount for the low range in steps of one
c						cent. ☞ P.97
	Amt		–100…		+100cent	Modulation amount of pitch shift amount for the low range
d	Low High Damp [%]		0…	100%		High component damping amount in the low range
	High Pitch [1/2tone]		–24…		+24	Sets pitch shift amount for the high range in steps of a
						semitone. ☞ P.97
e
	Amt		–24…		+24	Modulation amount of pitch shift amount for the high
						range
	High Fine [cent]		–100…		+100cent	Sets pitch shift amount for the low range in steps of one
						cent. ☞ P.97
f
	Amt		–100…		+100cent	Modulation amount of pitch shift amount for the high
						range
g	High High Damp [%]		0…	100%		High component damping amount in the high range
h	High/Low Split Point		1…	100		Splits frequencies between low and high ranges
	High/Low Balance		Low, 1:99… 99:1, High			Output balance between low and high ranges
i	Spread		–100…		+100	Sets the width of the stereo image of the effect sound.
						☞ P.132
	Wet/Dry		Dry, 1:99… 99:1, Wet			Sets the balance between the effect and dry sounds.
j	Src		None… Tempo			Modulation source of effect balance
	Amt		–100…		+100	Modulation amount of effect balance
i: Spread		This parameter specifies the width of the stereo image of the effect sound. With
		a value of +100, the low range signal is output from the left channel and the high
		range signal from the right channel. With a value of 0, both channels will output
		a mix signal of low and high-range signals. With a negative value, the output
		channel of the low and high-range signals will be reversed.

132