
41: Tempo Delay
a: Mode | This parameter selects the delay operating mode. When Manual is selected, the |
a: Src (fixed) | value set in e: Tempo will be used. When |
| chronize to the internal MIDI clock. This is useful for performances using a |
| sequencer. |
| When |
b:Tempo [beat/min] This parameter sets the tempo when Manual is selected for Mode.
b: Length | This parameter sets the delay time. The delay time is obtained by multiplying |
c: Delay 1362ms | the length of a whole note by the value of Length. |
| For example, when Length is set to 1/4, the length of the delay will be one quar- |
| ter note. |
| The maximum delay time is 1,362msec. If you attempt to set a higher value, the |
| display will show “OVER!!” Try to set the value of Tempo and Length so that |
| this error message will not appear. |
d:Feedback Count The Feedback Count parameter determines whether or not the number of feed-
d: Src (fixed) | back times will be counted or not. |
e: Count [times] | With Feedback Count = On, the delay will feed back the signal for the times |
| |
| specified in the Count parameter, and disappear. |
| The source that triggers the start of feedback counting is fixed to Gate1. You can- |
| not select another source. |
size2 |
107