Korg Trinity Plus, Trinity Pro Stereo Gate, Type Select, Hold Time msec, Stereo In Stereo Out

04: Stereo Gate

04: Stereo Gate

This is a stereo gate effect. Three types are available to turn the gate on/off. This effect features a Hold function that keeps the gate open for a specified period of time.

Stereo In - Stereo Out

Left Wet / Dry

	Delay	Gate
+	Envelope - Control
	Envelope - Control
Envelope Select	Delay	Gate

Right Wet / Dry

Gate+Sus

size2

			Level(Hold time is not avail-			Selects from No hold, Hold from attack, and hold from
a	Type Select		able), Trigger Attack, Trigger
						release. ☞ P.51
			Release
	Envelope Select		D-mod, L/R Mix, L Only, R			Selects from Control via the modulation source, mixing
			Only			the left and right signals, Only left, and Only right.☞ P.52
b
	Src		None…		Gate2+Sus	Modulation source that controls the gate when Envelope
						Select = D-mod
c	Polarity		+, –			Switches between non-reversed and reversed Gate on/
						off.☞ P.52
d	Threshold		0…	100		Sets the level to which the Gate is applied. ☞ P.17
e	Hold Time [msec]		0…	3000msec		Gate hold time ☞ P.51
f	Attack		1…	100		Sets attack time. ☞ P.17
g	Release		1…	100		Sets release time. ☞ P.17
h	Delay Time [msec]		0…	100msec		Delay time of gate input ☞ P.18
	Wet/Dry		Dry, 1:99… 99:1, Wet			Sets the balance between the effect and dry sounds.
i	Src		None…		Tempo	Modulation source of effect balance
	Amt		–100…		+100	Modulation amount of effect balance
a: Type Select		This parameter selects the gate type.
e: Hold Time [msec]		With Type Select = Level, the gate is opened when the input signal level exceeds

the specified Threshold value, and the gate is closed when the level is below the Threshold. Hold Time is not effective.

With Type Select = Trigger Attack, the gate is open only during the period speci- fied in the Hold Time field, after the input signal level exceeds the Threshold value. Once the gate is closed, it remains closed until the input level exceeds the Threshold value again.

With Type Select = Trigger Release, the gate is open when the input signal level exceeds the Threshold value. The gate is closed for a period specified in the Hold Time field after the level falls below the Threshold.

51