09:St. Random Filter (Stereo Random Filter)

a:AUTOFADE Src

a:Fade-In Rate

If AutoFade is selected for the LFO speed, depth of modulation, and Effect Bal- ance, you can use the AutoFade function to apply modulation.

The AUTOFADE Src parameter selects the modulation source that triggers Auto-

 

Fade. The Fade-in Rate parameter specifies the rate of fade-in.

size2

a: AUTOFADE Src = Gate1

The following is an example of fade-in where the effect balance is increased

 

from “Dry” to “50” when a note-on message is received.

 

f: Wet/Dry = Dry

 

f: Src = AUTOFADE

 

f: Amt = +50

 

The effect is off when a value for the dynamic modulation source speci- fied for the AUTOFADE Src parameter is smaller than 64, and the effect is on when the value is 64 or higher. The AutoFade function is triggered when the value changes from 63 or smaller to 64 or higher.

AUTOFADE AutoFade

AUTOFADE Src=Gate1

Wet/Dry=Dry

Gate1 SignalSrc=AUTOFADE

Amt=+50

Note On

All Note Off

Wet/Dry=50:50

AUTOFADE

Fade-In Rate

Wet/Dry=Dry

59

Page 63
Image 63
Korg Trinity Plus, Trinity ProX manual Size2, Autofade Src Fade-In Rate