
22: Resonator
22: Resonator
This effect resonates the input signal at a specified pitch. For example, the Resonator will add a unique character to a string sound by emphasizing certain harmonics, or give a “pitch” to a drum sound. You can control the resonance intensity via an LFO.
Mono In - Mono Out | 
  | |
In  | Wet / Dry  | |
  | ||
  | High Damp  | |
  | Resonator | |
  | Trim  | |
  | Resonance  | |
Manual  | 
  | |
LFO  | Pitch, Fine [cent]  | |
Control Mode  | ||
  | 
a  | Contol Mode  | 
  | Manual, LFO  | Switches the control of resonance intensity. ☞ P.39  | ||
  | 
  | 
  | 
  | 
  | 
  | |
b  | LFO Frequency [Hz]  | 
  | 0.02…  | 20.00Hz  | LFO speed  | |
  | 
  | 
  | 
  | 
  | 
  | |
c  | LFO Depth  | 
  | 100  | Amount of resonance intensity control via LFO  | ||
  | 
  | 
  | 
  | 
  | ||
d  | Trim  | 
  | 0… 100  | Input level to the Resonator  | ||
  | 
  | 
  | 
  | 
  | 
  | |
e  | Pitch  | 
  | C0…  | B8  | Pitch for resonance ☞ P.39  | |
  | 
  | 
  | 
  | 
  | 
  | |
f  | Fine [cent]  | 
  | +50cent  | Fine adjustment of pitch for resonance ☞ P.39  | ||
  | 
  | 
  | 
  | 
  | 
  | 
  | 
g  | Resonance  | 
  | +100  | Sets the intensity of resonance when Control Mode =  | ||
  | Manual. ☞ P.39  | |||||
  | 
  | 
  | 
  | 
  | 
  | |
  | 
  | 
  | 
  | 
  | 
  | 
  | 
h  | High Damp [%]  | 
  | 0… 100%  | Damping amount of resonant sound in the high range  | ||
  | ☞ P.39  | |||||
  | 
  | 
  | 
  | 
  | 
  | |
  | 
  | 
  | 
  | 
  | ||
  | Wet/Dry  | 
  | Dry, 1:99… 99:1, Wet  | Sets the balance between the effect and dry sounds.  | ||
  | 
  | 
  | 
  | 
  | 
  | |
i  | Src  | 
  | None…  | Tempo  | Modulation source of effect balance  | |
  | 
  | 
  | 
  | 
  | 
  | |
  | Amt  | 
  | +100  | Modulation amount of effect balance  | ||
  | 
  | 
  | 
  | 
  | ||
a: Contol Mode | This parameter determines whether the resonance intensity is controlled by an  | |||||
g: Resonance | LFO or not.  | 
  | 
  | 
  | ||
With Control Mode = Manual, the Resonance parameter sets the intensity of res- onance. If the Resonance parameter has a negative value, harmonics will be changed, and resonance will occur at a pitch one octave below.
With Control Mode = LFO, the intensity of resonance varies according to the LFO. The LFO sways between positive and negative values, causing resonance to occur between specified pitches an octave apart in turn.
e: Pitch | The Pitch parameter specifies the pitch of resonance by note name. The Fine  | 
f: Fine [cent] | parameter allows for fine adjustment in steps of cents.  | 
h:High Damp [%] This parameter sets the damping amount of resonant sound in the high range. Lower values will make a metallic sound with a higher range of harmonics.
size1 | 
39