21: Vibrato
38
21: VibratoThis effect causes the pitch of the input signal to shimmer. Using the AutoFade allows you to increase or
decrease the shimmering speed.
aAUTOFADE Src None…Tempo Sets the modulation source that starts AutoFade.
☞P.78
Fade-In Rate 1…100 Sets the rate of fade-in.
b LFO Waveform Triangle, Sine Selects the LFO Waveform.
c LFO Shape –100…+100 Determines how much the LFO waveform shape is
changed. ☞P.32
d
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…AUTOFADE Modulation source of LFO speed. AutoFade is available.
Amt –20.00…+20.00Hz Modulation amount of LFO speed
e
Depth 0…100 Depth of LFO modulation
Src None…Tempo Modulation source of the LFO modulation depth
Amt –100…+100 Modulation depth of the LFO modulation depth
f
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
Vibrato
In Wet / Dry
Mono In - Mono Out
LFO: Tri / Sine LFO Shape
LFO Frequency
AutoFade