FUNAI BZV420MW8 24 EN, To set one-touch timer recording OTR, Note for one-touch timer recording

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

6Press [REC I] to start recording.“I” will be displayed for 5 seconds.

I

Press [PAUSE F] to pause recording.

Press [PAUSE F]] or [REC I] again to restart recording.

7 Press [STOP C] to stop recording. The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 55.) e.g.) DVD+R

Writing to Disc 90%

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC I] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen. One-touch timer recording will start.

I0:30

0:30

(normal recording) 1:00

1	SP(2Hr)
NOV/21/07 11:00AM E1 SP
NOV/21/07	0:20:44
2
EMPTY TITLE
1:41:17 SP(2Hr)

• Press [STOP C] to exit the title list.

6:00 5:30

•To cancel one-touch timer recording within the specified time, press [STOP C].

Note

•When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.

•This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.

•When the unit clock has not been set, the space for a date and time of title names will be blank.

•You cannot change the recording mode during the recording pause mode.

•You can change a channel to be recorded during the recording pause mode.

Note for one-touch timer recording

•Press [DISPLAY] to see the remaining recording time on the TV screen.

•Unlike the timer recording, you can perform the following operations during one-touch timer recording.

-Turning off the power to stop one-touch timer recording.

-Using [REC I] or [STOP C] on the remote control.

•You cannot use the pause function during one-touch timer recording.

•If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode and the VCR keeps the current mode.

•When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby mode to use the unit continuously.

24 EN