10:27 AM 11/12 5775141

00:30

Elapsed time

Telephone operation

Basic operation

Timer

When you are not on a call, the timer starts when you make or receive a call on either line. Calls placed on hold will not stop the timer. The screen displays the elapsed time in minutes and seconds (up to 59:59) and then displays the hours and minutes up to 10 hours (09:59) before starting at 00:00 again. The timer will not stop until all calls have ended.

Volume

Handset/Speakerphone/Headset volume control

When you are on a call, press VOLUME to increase the listening volume. Press VOLUME to decrease the listening volume. The speakerphone has eight volume levels. The handset and headset have four levels. There are three beeps when you reach the minimum or maximum level.

Ringer volume

The ringer volume for each line can be adjusted independently. If a LINE button has been pressed, volume adjustments will affect the selected line. If no line is selected, volume adjustments will affect the primary line programmed (see Set the primary line on page 19). If one line is ringing, volume adjustments will affect the ringing line.

Press VOLUME or VOLUME to adjust the ringer volume. This telephone has eight ringer volume levels, including off. Each time you adjust the ringer, there is a sample ring indicating the volume level.

NOTE: The phone has a default distinctive ring tone for line 1 and line 2 which cannot be changed.

32

Page 35
Image 35
AT&T 993 2-Line user manual Timer, Volume Handset/Speakerphone/Headset volume control, Ringer volume