Connect the handset to the telephone | AT&T 993 2-Line guide

Getting started

Telephone installation

2. Connect the handset to the telephone.

Plug the coiled handset cord into the handset jack on the left side of the telephone. Plug the other end of the coiled handset cord into the handset, then hang up.

3.Connect the power adapter.

Thread the power adapter cord behind the slot at the back of the telephone base. Then plug the smaller end of the power adapter into the jack labeled 9V AC POWER on the back of the telephone. Plug the power adapter into an electrical outlet not controlled by a wall switch.

POWER jack

Electrical outlet not controlled by a wall switch

Power adapter

Slot

4.Check for a dial tone.

Press LINE 1, then lift the handset or press SPEAKER and listen for a dial tone. Then press LINE 2 and listen for a dial tone. If there is no dial tone, see Troubleshooting on page 58.

5.Confirm Lines 1 and 2.

Press LINE 1 and dial one of the telephone numbers. If there is a busy signal, line 1 is the number you called. If line 2 rings, line 2 is the number you called.

11

Image 14

AT&T 993 2-Line Connect the handset to the telephone, Connect the power adapter, Check for a dial tone, Confirm Lines 1

Contents

User’s manual Congratulations On purchasing your new AT&T product Stop Table of contents Caller ID Appendix Call history Product overview Auto Redial Press to activate the auto-redial Quick reference guideCall History Press to display caller ID information Dial pad keys Pause Parts checklist Glossary Telephone location Avoid placing the telephone too close to Optional spare battery Telephone installation Check for a dial tone Connect the power adapterConnect the handset to the telephone Confirm Lines 1 Data port 800 222-3111.In Canada, dial 1 866 Rotate the mounting bracket Connect the power cord to the telephoneWall mounting Reverse the handset tab Two-line modular wall jack 800 222-3111.In Canada, dial 1 866 Optional headset To exit Feature SETUP, press and hold Enter Menu operation Menu structure Set the primary line Feature setupTurn auto speaker on or off Turn automatic line selection on or off Set preferred mode Set the time and date Turn screen backlight on or off Set the scroll rate Turn the central office voicemail Covm indicator on or off Turn NEW Call light off Program home and local area codes Feature setup Choose how to store repeat calls in call history Set call history Turn caller ID with call waiting on or off Language Set the display language Basic operation Make, answer or end a call Handset Make, answer or end a call Headset Ringer volume TimerVolume Handset/Speakerphone/Headset volume control Display dial RedialSpeakerphone or headset Auto redial Press Auto Redial again Hold Switch between lines during a callOptions while on calls To release hold and return to the call To end a conference call, hang up MuteConference calls Place a conference call on hold Lights and what they mean Low battery indicatorConference calls Talk privately with one caller One-touch speed dial Lower key Store a number in one-touch Store a wait in a one-touch entry Store a pause in a one-touch entryStore a flash in a one-touch entry View a one-touch entry Dial a one-touch number Edit a one-touch number Erase a one-touch number Chain dialing Directory operation Menu structure Store a name and number in the directory Store a wait in a directory number Review directory entries Edit a directory entry Edit a name in the directory Edit a directory entry Edit a number in the directory Remove a name and number from the directory Dial a number from the directoryPrimary line on Caller ID operation Information about caller ID with call waiting How caller ID works Call waiting Message waiting and NEW Call lights Call history operation Review records in call history by line Remove all calls from call history . Press Call History Dial a number from call history Dial options Save a call history entry to the directory Out of Area ErrorDisplay screen messages Troubleshooting Eliminate any background noise. Noise from a Troubleshooting One-touch operation beginning on NEW Call light flashes Time and date on Power Failure isMemory Error CID del shown Important product information Especially about corded telephones Connection and use with the nationwide telephone network FCC and Acta informationProduct identifier and REN information Repair instructions Hearing aid compatibility Rights of the telephone service providerProgramming/testing of emergency numbers Part 15 of FCC rules How long is the limited warranty period? Limited warrantyWhat does this limited warranty cover? How do you get warranty service? Other limitations Default settings Feature Default General product care Technical specifications Index Index