Intellinet Network Solutions 525336 user manual Ascii

ASCII	The WEP key can be in ASCII format (alphanumeric values or
	signs are allowed) so it’s more recognizable for users.
PASSPHRASE	This is a text string with a maximum of 32 alphanumeric
	characters; for example, “Test.” The WEP key is based on the
	passphrase determined by you. This passphrase may not work
	with other vendors’ products due to possible incompatibility with
	other vendors’ passphrase generators, so you must use the same
	passphrase or WEP key settings for all wireless computers within
	the network.
Key Length	When you select “WEP and “PASSPHRASE,“ this function will
	display in the current status of the utility. The keys are used to
	encrypt data transmitted in the wireless network. Fill the text box
	by following the rules below.
	64-bit– Input 10-digit hex values as the encryption keys. For
	example: “0123456aef.“
	128-bit– Input 26-digit hex values as the encryption keys. For
	example: “01234567890123456789abcdef.“
Key Index (advanced)	Select one of the four keys to be the data encryption key.
Network Key	Enter the network security key ensure the password is correct.
Confirm Network Key	Enter the network security key again.
EAP Type	GTC – GTC is an authentication protocol that allows the exchange
	of clear text authentication credentials across the network.
	TLS – TLS is the most secure of the EAP protocols, but is not
	easy to use. It requires that digital certificates be exchanged in the
	authentication phase. The server presents a certificate to the
	client. After validating the server’s certificate, the client presents a
	client certificate to the server for validation.
	LEAP – LEAP is a pre-EAP, Cisco-proprietary protocol with many
	of the features of EAP protocols. Cisco controls the ability of other
	vendors to implement this protocol, so it should be selected for
	use only when limited vendor choice for client, access-point and
	server products is not a concern. When you have set up LEAP
	authentication, you need to enter the user name and password of
	your computer.
	PEAP & TTLS – PEAP and TTLS are similar and easier than TLS
	in that they specify that a stand-alone authentication protocol be
	used within an encrypted tunnel. TTLS supports any protocol
	within its tunnel, including CHAP, MSCHAP, MSCHAPv2 and
	PAP. PEAP specifies that an EAP-compliant authentication
	protocol must be used; this adapter supports MD5, TLS, GTC
	(Generic Token Card) and MSCHAPv2.
Tunnel	Includes MD5, GTC, TLS, MSCHAP-v2.
Username	The certificate username in the RADIUS server.
Identity	User’s identity in the RADIUS server.
	15