Intellinet Network Solutions 524438 user manual Profile Authentication and Encryption Security

Page 13

RTS Threshold: This is the minimum packet size required for an RTS (request to send). For packets smaller than this threshold, an RTS is

not sent and the packet is transmitted directly to the wireless network. Select a setting within a range of 0 to 2347 bytes. NOTE: A minor change is recommended.

Fragment Threshold: This value defines the maximum size of packets;

any packet size larger than the value will be fragmented. If you’ve

decreased this value and experience high packet-error rates, you

can increase it again, but it will likely decrease overall network

performance. Select a setting within a range of 256 to 2346 bytes.

NOTE: A minor change is recommended.

Profile Authentication and Encryption (Security)

Authentication Type: This pull-down menu setting has to be consistent . with the wireless networks that the adapter is intended to connect.

•Open: No authentication is needed within the wireless network.

•Shared: Only wireless devices using a shared key (WEP key identified) are allowed to connect to each other.

•LEAP: This is a pre-EAP, Cisco-proprietary protocol with many of the features of EAP protocols. Cisco controls the ability of other vendors to implement this protocol, so it should be selected for use only when a limited vendor choice for client, access point and server products is not a concern. When you’ve set up LEAP authentication, . you need to enter the username and password of your computer.

•WPA: WPA provides a scheme of mutual authentication using either

IEEE 802.1x/Extensible Authentication Protocol (EAP) authentication

CONFIGURATION 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model Page FCC Certifications TTE Compliance Statement FCC RF Radiation Exposure StatementEU Countries Intended for Use Table of contents Installation Configuration Option Network Profile Configuration Profile Configuration Profile Authentication and Encryption Security Configuration Configuration 802.1x Setting/Certification User login to the LAN approved or deniedRadius Client Radius Server Windows802.1x Setting/CA Server Advanced StatisticsTo this mode. This mode is also the default setting Show Authentication Status Dialog Select to display WMM About Wps configurationAutomatically select the AP Select to activate SoftAP ConfigurationWireless Mode Selects the wireless mode supported by the AP Security setting Softap Access control Event log Mac tableStatistics Specifications

524438 specifications

Intellinet Network Solutions offers a wide range of networking products and services aimed at enhancing connectivity and efficiency for businesses of all sizes. One notable product from Intellinet is the 524438, a versatile Gigabit Ethernet switch designed to meet the growing demands of network expansion and management in modern enterprises.

The 524438 switch is equipped with 48 Gigabit Ethernet ports, allowing for high-speed connectivity that is essential for data-intensive applications and services. These ports support auto-sensing and auto-negotiation capabilities, ensuring that devices connected to the switch can automatically link at the highest possible speed. This feature is particularly beneficial in mixed environments where different devices may operate at varying speeds.

An impressive characteristic of the 524438 is its capability for Power over Ethernet (PoE). This technology enables the switch to deliver power along with data to connected devices such as IP cameras, VoIP phones, and wireless access points. By supporting PoE, the 524438 simplifies installation processes by reducing the need for additional power outlets, thereby streamlining cable management within office spaces.

Taking into account network management needs, the 524438 is designed for easy integration into existing infrastructures. It supports various management protocols such as SNMP and has a user-friendly web interface for configuration and monitoring. This capability allows IT administrators to keep a close eye on network performance and quickly respond to any issues that may arise.

In addition to its hardware capabilities, the Intellinet 524438 offers features like VLAN support, which helps segregate network traffic for better security and performance. The switch supports Quality of Service (QoS) configurations, ensuring that critical applications receive the bandwidth they require while maintaining overall network efficiency.

Moreover, the 524438 incorporates robust security features, such as port security and access control lists (ACLs), enhancing the overall security posture of the network. These features protect against unauthorized access and ensure that sensitive data remains secure.

In summary, the Intellinet Network Solutions 524438 switch combines high-capacity connectivity, PoE support, efficient management capabilities, VLAN support, and strong security features, making it an ideal solution for businesses seeking to build or expand their network infrastructure. This versatile switch is well-suited for modern networking challenges, facilitating seamless communication and collaboration within organizations.
Top Page Image Contents