Intellinet Network Solutions 524438 Wireless Mode Selects the wireless mode supported by the AP

Page 25

name identified in a wireless LAN. The ID prevents the unintentional merging of two co-located WLANs. The default SSID of the AP is “SoftAP-X.” (“X” is the last number of this adapter’s MAC address). Wireless adapters connected to the access point should be set up with the same SSID as the AP.

Channel: Select the number of the radio channel used by the access point. Any wireless adapters connected to the AP should be set up with the same channel.

Wireless Mode: Selects the wireless mode supported by the AP.

Use MAC Address: Click to create a unique SSID based on the adapter’s MAC address.

Security Setting: Click to further configure WLAN authentication and security settings. (See the separate Security Setting section below.)

Country Region Code: Channel availability varies from country to country; e.g., USA (FCC) channels are 1-11, while Europe’s (ETSI) are 1-13.

Beacon (ms): Define the time between beacons (default is 100 ms.)

Tx Power: To lower the transmit power of the AP to reduce the power used by the system, select a lower percentage from the drop-down menu. NOTE: A lower power level will result in lower signal strength . and reduced coverage range.

Idle Time: Select the idle time for the wireless access point. The default value is 300, and normally there is no need to change it.

No forwarding among wireless clients: Enable to prevent wireless clients connected to this AP from sharing information with each other.

Hide SSID: When this box is checked, the AP will not appear in the site survey list of any wireless clients, meaning only the wireless clients set with the same SSID can connect to the AP. This prevents the AP being connected to by unauthorized users.

Allow BW 40 MHz: Check this box to allow BW 40 MHz capability.

Tx Burst: Check this box to accelerate the data transmit rate. It may not work with all wireless access points and wireless devices.

Default: Click to use the default value.

Apply: Click to apply the setting change(s).

softap 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model Page FCC Certifications TTE Compliance Statement FCC RF Radiation Exposure StatementEU Countries Intended for Use Table of contents Installation Configuration Option Network Profile Configuration Profile Configuration Profile Authentication and Encryption Security Configuration Configuration 802.1x Setting/Certification User login to the LAN approved or deniedRadius Client Radius Server Windows802.1x Setting/CA Server Advanced StatisticsTo this mode. This mode is also the default setting Show Authentication Status Dialog Select to display WMM About Wps configurationAutomatically select the AP Select to activate SoftAP ConfigurationWireless Mode Selects the wireless mode supported by the AP Security setting Softap Access control Event log Mac tableStatistics Specifications

524438 specifications

Intellinet Network Solutions offers a wide range of networking products and services aimed at enhancing connectivity and efficiency for businesses of all sizes. One notable product from Intellinet is the 524438, a versatile Gigabit Ethernet switch designed to meet the growing demands of network expansion and management in modern enterprises.

The 524438 switch is equipped with 48 Gigabit Ethernet ports, allowing for high-speed connectivity that is essential for data-intensive applications and services. These ports support auto-sensing and auto-negotiation capabilities, ensuring that devices connected to the switch can automatically link at the highest possible speed. This feature is particularly beneficial in mixed environments where different devices may operate at varying speeds.

An impressive characteristic of the 524438 is its capability for Power over Ethernet (PoE). This technology enables the switch to deliver power along with data to connected devices such as IP cameras, VoIP phones, and wireless access points. By supporting PoE, the 524438 simplifies installation processes by reducing the need for additional power outlets, thereby streamlining cable management within office spaces.

Taking into account network management needs, the 524438 is designed for easy integration into existing infrastructures. It supports various management protocols such as SNMP and has a user-friendly web interface for configuration and monitoring. This capability allows IT administrators to keep a close eye on network performance and quickly respond to any issues that may arise.

In addition to its hardware capabilities, the Intellinet 524438 offers features like VLAN support, which helps segregate network traffic for better security and performance. The switch supports Quality of Service (QoS) configurations, ensuring that critical applications receive the bandwidth they require while maintaining overall network efficiency.

Moreover, the 524438 incorporates robust security features, such as port security and access control lists (ACLs), enhancing the overall security posture of the network. These features protect against unauthorized access and ensure that sensitive data remains secure.

In summary, the Intellinet Network Solutions 524438 switch combines high-capacity connectivity, PoE support, efficient management capabilities, VLAN support, and strong security features, making it an ideal solution for businesses seeking to build or expand their network infrastructure. This versatile switch is well-suited for modern networking challenges, facilitating seamless communication and collaboration within organizations.
Top Page Image Contents