Intellinet Network Solutions 524438 user manual Configuration

Page 15

•WEP: Enables the WEP Data Encryption. When the item is selected, . you need to continue setting the WEP Encryption keys.

•TKIP: The Temporal Key Integrity Protocol changes the temporal key every 10,000 packets (a kind of message transmitted over a network.) . This ensures much greater security than the standard WEP security.

•AES: AES has been developed to ensure the highest degree of security and authenticity for digital information. It’s the most advanced solution defined by IEEE 802.11i for security in the wireless network.

NOTE: All devices in the network should use the same encryption method to ensure the security of communications.

WPA Pre-Shared Key: The WPA-PSK key can be 8 to 64 characters in length and can be letters or numbers. This same key must be used on all the wireless stations in the network.

WEP Key (Key#1–4):WEP keys are used to encrypt data transmitted in the wireless network. There are two types of key length: 64-bit and 128-bit. Assign a default encryption key (Key#1 to Key#4) by clicking on the corresponding radio button. To fill in each text field:

•64-bit:Input 10-digit hex values (in the A-F, a-f and 0-9 range) or 5-digit ASCII characters (a-z and 0-9) as the encryption keys. For example: “0123456aef“ or “test1.”

•128-bit:Input 26-digit hex values (in the A-F, a-f and 0-9 range) or 13-digit ASCII characters (“a-z” and “0-9”) as the encryption keys. For example: “01234567890123456789abcdef“ or “administrator.”

The IEEE 802.1X specification describes a protocol that can be used for authenticating both clients (802.1x Setting/Certification below) and servers (802.1x Setting/CA Server below) on a network. The authentication algorithms and methods are those provided by the Extensible Authentication Protocol (EAP), a method of authentication that has been in use for a number of years on networks that provide Point-to-Point Protocol (PPP) support (as many Internet service providers and enterprises do). EAP runs before network layer protocols transmit data over the link.

When an AP acting as an authenticator detects a wireless station on the LAN, it sends an EAP request for the user’s identity to the device. In turn, the device responds with its identity, and the AP relays this identity to an authentication server (typically an external RADIUS server).

CONFIGURATION 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model Page FCC Certifications FCC RF Radiation Exposure Statement TTE Compliance StatementEU Countries Intended for Use Table of contents Installation Configuration Option Network Profile Configuration Profile Configuration Profile Authentication and Encryption Security Configuration Configuration Windows User login to the LAN approved or denied802.1x Setting/Certification Radius Client Radius Server802.1x Setting/CA Server Advanced StatisticsTo this mode. This mode is also the default setting Show Authentication Status Dialog Select to display WMM About Wps configurationAutomatically select the AP Select to activate SoftAP ConfigurationWireless Mode Selects the wireless mode supported by the AP Security setting Softap Access control Event log Mac tableStatistics Specifications

524438 specifications

Intellinet Network Solutions offers a wide range of networking products and services aimed at enhancing connectivity and efficiency for businesses of all sizes. One notable product from Intellinet is the 524438, a versatile Gigabit Ethernet switch designed to meet the growing demands of network expansion and management in modern enterprises.

The 524438 switch is equipped with 48 Gigabit Ethernet ports, allowing for high-speed connectivity that is essential for data-intensive applications and services. These ports support auto-sensing and auto-negotiation capabilities, ensuring that devices connected to the switch can automatically link at the highest possible speed. This feature is particularly beneficial in mixed environments where different devices may operate at varying speeds.

An impressive characteristic of the 524438 is its capability for Power over Ethernet (PoE). This technology enables the switch to deliver power along with data to connected devices such as IP cameras, VoIP phones, and wireless access points. By supporting PoE, the 524438 simplifies installation processes by reducing the need for additional power outlets, thereby streamlining cable management within office spaces.

Taking into account network management needs, the 524438 is designed for easy integration into existing infrastructures. It supports various management protocols such as SNMP and has a user-friendly web interface for configuration and monitoring. This capability allows IT administrators to keep a close eye on network performance and quickly respond to any issues that may arise.

In addition to its hardware capabilities, the Intellinet 524438 offers features like VLAN support, which helps segregate network traffic for better security and performance. The switch supports Quality of Service (QoS) configurations, ensuring that critical applications receive the bandwidth they require while maintaining overall network efficiency.

Moreover, the 524438 incorporates robust security features, such as port security and access control lists (ACLs), enhancing the overall security posture of the network. These features protect against unauthorized access and ensure that sensitive data remains secure.

In summary, the Intellinet Network Solutions 524438 switch combines high-capacity connectivity, PoE support, efficient management capabilities, VLAN support, and strong security features, making it an ideal solution for businesses seeking to build or expand their network infrastructure. This versatile switch is well-suited for modern networking challenges, facilitating seamless communication and collaboration within organizations.
Top Page Image Contents