Kingston Technology PCREAD/SSFDC manual Installing the Ssfdc Reader, Parallel Port Connection

Page 9

Hardware Installation

3

Installing the SSFDC™ Reader

The SSFDC™ Card Reader is designed to connect to your desktop PC’s IBM compatible parallel port. The instructions beginning below describe how to attach the SSFDC™ Card Reader to your PC.

Step 1. Parallel Port Connection

1.Place the computer’s power switch in the OFF position.

2.If present, place the printer’s power switch in the OFF position.

3.If present, remove the cable extending between your computer’s parallel port connector and your printer.

4.Plug the SSFDC™ Card Reader’s 25-pin connector into your computer’s parallel port connector. To make sure the SSFDC™ Card Reader does not pull loose, tighten the thumb screws as indicated below.

Use the thumbscrews on each side of the connector to secure the device to your parallel port.

SSFDC™ Reader to Parallel Port Connection

SSFDC™ Card Reader - Rev. A00

Kingston Technology Company

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Page Page Kingston Technology’s Ssfdc Card Reader For Desktop PCs User’s GuidePart No -001.A00 Page Table of Contents Page Ssfdc Card Reader for Desktop PCs IntroductionPackage Contents Special FeaturesParallel Port Connection Installing the Ssfdc ReaderPrinter Pass-Through Connection Ssfdc Reader DC Power Connection DC Power for Ssfdc ReaderPS/2 Keyboard Connection AT Keyboard Connection Ssfdc Card Adapter Inserting Ssfdc CardsHot Swapping Software InstallationPC Storage Card High Level Format Appendices Symptom Possible Cause Suggestion Appendix a TroubleshootingParallel Port Conflict Window 95/98 How to Reach Kingston Appendix B Product Warranties and Notices Limited WarrantyWarranty Claim Requirements CE Notice C. CertificationAppendix B Product Warranties and Notices Revision Level Comments Revision History
Top Page Image Contents