Hardware Installation | 7 |
3.For AT style keyboards, you will attach the DC power cable as shown below. First, unplug your keyboard from the computer’s rear panel. Plug the end of power adapter cable with the AT connector directly into the keyboard connector on your computer’s rear panel. At the opposite end of the power adapter cable, plug in the “PS/2 to AT adapter” as shown in the illustration below. Now, plug the cable extending from your keyboard into the “PS/2 to AT adapter.
Note: When power is applied, the LED on the SSFDC™ Card Reader will remain constantly lit. When a PC storage card is inserted or accessed the LED will flicker.
AT Connector
AT Keyboard
Configuration
Plugs into the Cable extending from your AT Keyboard
PS/2 to AT
Keyboard Adapter
AT Keyboard Connection
4.The hardware installation is now complete.
SSFDC™ Card Reader - Rev. A00 | Kingston Technology Company |