AMX HDMI-UTPRO-0808Product Specifications, HDMI-UTPRO-0808Specifications, Parameter, Value

Overview and General Specifications

HDMI-UTPRO-0808 Product Specifications

HDMI-UTPRO-0808 Specifications

Parameter	Value
Approvals	UL, cUL, CE, FCC Class A, RoHS, WEEE
Humidity	0 to 90% non-condensing
Operational Temperature	32° F to 113° F (0° C to 45° C)
Storage Temperature	-22° F to 158° F (-30° C to 70° C)
AC Power*	100 VAC to 240 VAC, single phase (50 Hz to 60 Hz)
Power Consumption (max.)	110 Watts, fully loaded
Thermal Dissipation (max.)	375 BTU/hr, fully loaded
MTBF	71,000 hours
Dimensions	Approximately 12 in. (30.5 cm)
Depth
Width with mounting ears	18.9 in. (48.0 cm)
Width without mounting ears	17.4 in. (44.2 cm)
Height	3.5 in. (8.9 cm) (2 RU)
Weight	Approximately 13 lb. (5.9 kg)
Shipping Weight	46 lbs (20.87 kg) for complete system kit including 8 RXs (2 shipping boxes)
Front Panel Components
Function Key	The Function Key accesses the Function menu on the LCD.
Control Dial	The Control Dial scrolls through menu options and adjusts values, such as global preset
	numbers.
Select Key	The Select Key enters a menu selection and can be used to execute presets.
LCD Display	The LCD displays the Function menu. The Function menu and its submenus access the
	different modes and lists used to control the system.
Cancel Key	The Cancel Key clears an incomplete operation and returns the display to the beginning
	of a submenu or list.
Take Key	The Take Key instructs the system to execute or disconnect a switch.
Input/Output 1-8 Keys	Input and Output Keys (1-8) correspond to the input and output connections on the rear
	of the enclosure. These keys are used to select the input and outputs for routing source
	signals to destination devices as well as for status and other operations such as locking
	and unlocking the control panel.
Power LED	The Power LED illuminates to indicate the unit is receiving power.
Rear Panel Components
Power Connector	The universal power receptacle accepts all major international standard power sources.
	Note: The rating along the sides of the power connector contains important installation
	information.
Control Port (CPU)	Bi-directional RS-232
	Baud rates of 9600, 19200, 38400, 57600 (default 9600)
	DB-9 connector
Status LED (CPU)	System status indicator
ID Push Button	Places the system in NetLinx Device ID assignment mode (requires NetLinx Studio).
	Not required for installation.
LAN 10/100 port (Ethernet)	Native NetLinx Device
	TCP/IP (LAN 10/100)
	Serves built-in WebConsole
	Auto MDI/MDI-X cross-over
	RJ-45 connector

*The fuse is internal and is not field serviceable. If you believe the fuse needs to be replaced, contact technical support (see page 43).

Instruction Manual – HDMI-UTPRO-0808 17