AMX HDMI-UTPRO-0808 instruction manual Transport Connectors, System Serial Number

Overview and General Specifications

HDMI Matrix Switching Connectors (1-8 HDMI Inputs and 1-8 HDMI Outputs)

The HDMI matrix switching connectors (8 inputs left and 8 outputs right) are on the top as viewed from the rear of the enclosure. Information on cabling these connectors is on page 29, and special HDMI concerns and considerations are covered in the “Setting Up HDMI Systems” chapter (see page 60).

HDMI matrix switching input connectors HDMI matrix switching output connectors

FIG. 5 HDMI matrix switching connectors

HDMI and UTP Transport Connectors (1-8 HDMI Inputs and 1-8 RJ-45 Outputs)

HDMI transport input connectors

UTP (RJ-45) transport output connectors

FIG. 6 HDMI and UTP transport connectors

The UTP transport connectors are on the bottom as viewed from the rear of the enclosure.

Important: For detailed cabling information for the HDMI and UTP transport connectors, see page 29.

Transport Connectors

HDMI transport input connectors (IN 1-8) – accept cables from the HDMI matrix switching outputs (OUT 1-8); be sure each patch cable is connected to corresponding numbers (1 to 1, 2 to 2, etc.). The number for the HDMI matrix switching output connector and number for the HDMI transport input connector must match for each patch cable.

UTP (RJ-45) transport output connectors (OUT 1-8) – provide connectivity for up to 8 HDMI-UTPRO-RX Receivers (FG1403-20) via UTP cable.

Important: Do not use the UTP transport connectors for connecting to a standard Ethernet network.

System Serial Number

The system’s serial number is normally located in two places on the enclosure. When viewed from the rear, one serial number label is on the left above the power receptacle. The second serial number label is on the left side of the enclosure at the bottom edge near the power receptacle. The label on the side will also have the enclosure number (referred to as the chassis number).

Before installation, we recommend recording the system’s serial number in an easily accessible location.

Instruction Manual – HDMI-UTPRO-0808 14