Appendix C – Managing Configuration Files
To set the password and load it to the control panel:
1.Discover the system (see page 112) or open the .xcl file (see page 111).
2.In the Hardware view,
3.Select Set Password from the
4.Enter a single digit between one and eight (inclusive) in each field (for digit parameters, see the “Important” note at the bottom of the previous page).
5.Check the box for Configure Password Immediately.
Important: If you use the Configure menu instead of checking the box, the only configuration option that will load password information is Configure \ Configure Special - Hardware \ Configure All Passwords.
6.Click OK.
The updated password information is immediately loaded to the control panel, and the new password sequence must be used to lock and unlock the control panel.
7.From the File menu, select Save As and save an .xcl file with a new name to the PC. (We strongly recommend making a duplicate copy every time the file is modified.)
Creating Local Presets
A local preset is a predetermined collection of switches on the same virtual matrix to be routed simultaneously. Executing a local preset affects only those inputs and outputs specified, not the whole system. Local presets are defined using XNConnect and can be executed using a control panel (local or remote) or using BCS commands as part of a macro in APControl 3.0 or APWeb or entered in a terminal emulation program. The process for creating local presets involves three dialog boxes that cover managing, naming, and modifying presets.
The HDMI UTPro supports a maximum of 16 local presets.
The instructions following are for creating a local preset. For detailed information on modifying and deleting local presets, see the XNConnect Help file.
To create a new local preset:
1.In the Virtual Matrices view,
The Manage Local Presets dialog box opens.
Instruction Manual – | 115 |
|
|
