AMX HDMI-UTPRO-0808 instruction manual HDMI-UTPRO-RX Receiver, HDMI-UTPRO-RX Components

Overview and General Specifications

HDMI-UTPRO-RX Receiver

The HDMI-UTPRO-RX Receiver is used in conjunction with the HDMI UTPro 8x8 to assist in the transport of HDMI signals over UTP cable. Cables from the HDMI UTPro are connected to the HDMI-UTPRO-RX Receivers, which in turn are connected to the destination devices. In addition, the Receiver has ports for serial communication and IR control (FIG. 7).

The size of the Receiver makes it easy to mount near or behind a high definition monitor. A Surface Mounting Bracket kit (FG525) is available for this purpose. The Receivers should not be stacked to allow for adequate cooling. If mounting in a rack using some type of tray, a minimum of one empty rack unit above and below is recommended (see the section on “Airflow Restriction” on page 24).

FIG. 7 HDMI-UTPRO-RX Receiver

HDMI-UTPRO-RX Components

The front of the HDMI-UTPRO-RX Receiver has an LED Power indicator.

The rear components on the HDMI-UTPRO-RX Receiver include the following from left to right: Power jack – 12 V to 24 V DC power jack (desktop power supply provided*)

Serial port (RJ-12) – optional serial communication for control of the monitor (see page 16)

IR Rx port – supports generation of NetLinx key presses (channel events) from AMX remote controls (see “IR Control” on page 16)

IR Tx port – supports wired control of connected IR devices (see “IR Control” on page 16) HDMI Out connector – HDMI connector connects via HDMI cable to the destination device

Input connector – RJ-45 connector connects via UTP cable to an RJ-45 output connector on the HDMI UTPro

*The automatically adjusting universal 110/220 IEC power supply is ENERGY STAR® qualified to ensure maximum efficiency and savings.

Instruction Manual – HDMI-UTPRO-0808 15