Appendix C – Managing Configuration Files
Restoring the Automatic Configuration
Caution: Restoring the automatically constructed configuration will result in the loss of all custom .xcl configuration file modifications (local presets, passwords, etc.).
To restore the automatically constructed configuration:
1.Connect the system to a PC (see page 39).
2.Open a terminal emulation program (e.g., TeraTerm, PuTTY, or HyperTerminal).
3.Enter: ~def! to restore the configuration.
4.Wait for a “V” to be returned (may take several seconds).
Device Discovery Support
XNConnect v2.10.0 supports Device Discovery (firmware v1.4.0 or higher is required). Typically the default configuration string generated by XNConnect is all that is necessary. However, certain conditions may warrant a custom string, such as the need to limit the VMs that are available for control by the AMX control system. Or a need may exist to limit the features available for a system, e.g., omitting the ability to adjust input gain, but leaving support for output volume. To customize the configuration string, see the XNConnect Help file topic “Device Discovery Config String Input.”
Instruction Manual – | 118 |
|
|
