HDMI UTPro NetLinx Programming
HDMI UTPro NetLinx Programming
Overview
The HDMI UTPro recognizes a select number of SEND_COMMANDs. Use NetLinx Studio (Version 3 or higher is required) to send these commands to the HDMI UTPro.
Device Numbering
By default, the Device Number assigned to the HDMI UTPro is 05500 (in the WebConsole, the device’s number displays as 5500). In NetLinx Studio’s Online Tree, the HDMI UTPro is listed as a device with three ports, and each
HDMI UTPro with device
number assigned to 05500 (default)
Ports
Ports
Ports
Ports
number
Ports
(device number 05504)
Ports
number
Ports
(device number 05506) | ||
|
| |
Ports | number | |
| ||
(device number 05507) | ||
|
| |
Ports | number | |
| ||
(device number 05508) |
| |
FIG. 56 NetLinx Studio Online Tree - indicating HDMI UTPro and connected HDMI-UTPRO-RX Receivers
The HDMI UTPro’s three ports in the Online Tree are:
Port 1 – Used for SEND_COMMANDs for HDMI UTPro control and switching.
Port 2 – Standard NetLinx serial port connected to the LAN 10/100
Port 3 – Reserved for future use.
Instruction Manual – | 83 |
|
|
